SA…E SA…ES - Rod Ends

SA…E
SA…ES

Release date：2017-06-22 16:11

Series and bore diameter range：

SA…E 5～12

SA…ES 15～80

Sliding contact surfaces：

Steel/Steel

Permissible operating temperature range：

－50℃～＋150℃

Design characteristics：Rod end with male or female thread is made up of a rod end and a radial spherical plain bearing of sreies GE…E or GE…ES，rod end of steel and zinc coated；Can be relubricated via a nipple or a hole in the rod end, except those of the E design.

轴承型号 Bearing number	外形尺寸 Dimensions mm												额定载荷 Load ratings kN		重量 Weight ≈kg
轴承型号 Bearing number	d	B	d_k	C₁ max	d₂	G 6g	h	l₁ min	l₂	l₇	r_s min	αº ≈	动载荷 Dynamic	静载荷 Static	重量 Weight ≈kg
SA5E¹⁾	5	6	10	4.5	21	M5	36	16	46.5	11.5	0.3	13	3.4	3.9	0.015
SA6E¹⁾	6	6	10	4.5	21	M6	36	16	46.5	11.5	0.3	13	3.4	5.5	0.016
SA8E¹⁾	8	8	13	6.5	24	M8	42	21	54	13	0.3	15	5.5	10	0.026
SA10E¹⁾	10	9	16	7.5	29	M10	48	26	62.5	15.5	0.3	12	8.1	16	0.050
SA12E¹⁾	12	10	18	8.5	34	M12	54	28	71	18	0.3	10	10	23	0.068
SA15ES²⁾	15	12	22	10.5	40	M14	63	34	83	21	0.3	8	16	32	0.120
SA17ES²⁾	17	14	25	11.5	46	M16	69	36	92	24	0.3	10	21	44	0.190
SA20ES²⁾	20	16	29	13.5	53	M20×1.5	78	43	104.5	25.5	0.3	9	30	60	0.300
SA25ES	25	20	35.5	18	64	M24×2	94	53	126	31	0.6	7	48	83	0.555
SA30ES	30	22	40.7	20	73	M30×2	110	65	146.5	35.5	0.6	6	62	110	0.875
SA35ES	35	25	47	22	82	M36×3	140	82	181	41	0.6	6	79	146	1.42
SA40ES	40	28	53	24	92	M39×3	150	86	196	47	0.6	7	99	180	1.85
SAS40ES	40	28	53	23	92	M42×3	145	86	191	47	0.6	7	99	180	2.04
SA45ES	45	32	60	28	102	M42×3	163	92	214	52	0.6	7	127	240	2.49
SAS45ES	45	32	60	27	102	M45×3	165	95	216	52	0.6	7	127	240	2.74
SA50ES	50	35	66	31	112	M45×3	185	104	241	60	0.6	6	156	290	3.58
SAS50ES	50	35	66	30	112	M52×3	195	110	251	60	0.6	6	156	290	4.07
SA60ES	60	44	80	39	135	M52×3	210	115	277.5	75.5	1.0	6	245	450	5.89
SAS60ES	60	44	80	38	135	M60×4	225	120	292.5	75.5	1.0	6	245	450	6.79
SA70ES	70	49	92	43	160	M56×4	235	125	315	95	1.0	6	313	610	8.51
SAS70ES	70	59	92	42	160	M72×4	265	132	345	95	1.0	6	313	610	11.2
SA80ES	80	55	105	48	180	M64×4	270	140	360	105.5	1.0	6	400	750	12.3
SAS80ES	80	55	105	47	180	M80×4	295	147	385	105.5	1.0	6	400	750	15.3

1)Can not be relubricated.

2)Can only be relubricated through the rod end housing.

Can supply other rod ends with different pitch or accuracy of thread.

For left-hand thread，suffix “L” is added to bearings number and thread sign，e.g. SAL20ES M20×1.5L-6g.